kirkwerner
May 2, 2007, 12:11 PM
:confused: Any one know an easy way to change belt? And how to loosen pully bolt in bottom of motor?
jojojo999
Nov 24, 2009, 08:03 AM
1. Remove old belt/.
2. Install new belt.
Good luck!
crigby
Nov 24, 2009, 09:06 AM
Hi.
Often there is a plate that acts as the belt guide(s) that is held on by two bolts on each side. Loosening it and just dropping it down will allow access.
Please provide a model number.
Peace,
Clarke