Ok I've formated this HD and now I need drivers and IDK where to get them. Preffably ones that don't cost me money (cuz I have none) I looked at several site and most want money, they don't have it of IDK what the heck I'm looking for.
So any help would be greatly apreciated =)
Need drivers for:
Printer: Apollo P-2150
Monitor: Daytek model # DT-1436D
Graphic Accerator: Some generic piece of junk (No Name) so I don't know what this is other then a "Standard PCI Graphics Adapter (VGA)" AuthenticAMD AMD-K6(tm) 3D processor 128MB RAM
OS is Windows 98se

Been lloking for like 3-4 hours and I can't find S*** (excuse the prophanity and bad spelling)
but just getting annoyed at the fact I am stuck in 800x600 mode and only 16 color... color was a choise os 2 o16 =/

Ok here is what I think is the name of the graphic adaptor, its Atrend ATG7400A and I can't find a damm thing on it.... don't know how my cuzin got it.....
anyways this might help for the driver I hope

Ha Ha! I got the stupid computer fix... again :D

When to this other site that had some useful info on how to tell what kind of video card/adapter you have,. never knew this either but hey! It works

Just type debug at the C: prompt then you get a - after you see that you type d c000:0040 or for more info on the vid card you type d c000:0090 and there you have it the info you need to see what you got :D

So when you type the # above it looks like this:

-d c000:0040
or
-d c000:0090

Of course the (-) will already be there so ya don't have to type that :p
Just thought I'd pass on the info in case some else needed it

Oh by the way... it turns out my vid adapter is a Intel740 lol was looking for the wrong think when I took the card out to look at it... no name on it lol