PDA

View Full Version : Melacribe


melacribe
Mar 12, 2005, 07:21 AM
I am installing a 48"x34" shower pan. Naturally, the drain is in an inconvenient place. Is there anything similar for shower pans like the drain pieces on tubs so that I can change the location of the trap? If there is no similar product, is it permissible for me to come out of the shower drain with a 90' elbow and then over approximately 24" and then 90' down to the trap?

speedball1
Mar 12, 2005, 08:46 AM
I am installing a 48"x34" shower pan. Naturally, the drain is in an inconvenient place. Is there anything similar for shower pans like the drain pieces on tubs so that I can change the location of the trap? If there is no similar product, is it permissable for me to come out of the shower drain with a 90' elbow and then over approximately 24" and then 90' down to the trap?
You can not change the traps location without taking up the floor and moving it. Jacking up the shower pan and installing a dog leg of two 90's is begging for a clog. Let me show you a link where you may be able to find a pan that will fit your needs. http://www.pellandent.com/RV_Products_List.aspx?CategoryID=15
If that don't help click on back and we'll explore other options. Regards, Tom

labman
Mar 12, 2005, 08:47 AM
If you have access to do it, I would keep the trap near the shower. Less pipe before the trap for odors to build up, easier to auger if needed. Whatever you do, make sure the elbows are DVW elbows with the longer radius to avoid clogs. Try to use 45's rather than 90's.

melacribe
Mar 12, 2005, 09:11 AM
Thanks for the replies. I wasn't thinking about the clogs. The drain in question is in the master bath which is over the garage so I have complete access from below and can use 45's. If I use a 45 then a short length (12") of 2" pvc then another 45, would that minimize the clog problem?

speedball1
Mar 12, 2005, 09:24 AM
Thanks for the replies. I wasn't thinking about the clogs. The drain in question is in the master bath which is over the garage so I have complete access from below and can use 45's. If I use a 45 then a short length (12") of 2" pvc then another 45, would that minimize the clog problem?

I don't ever recommend bends in drainage unless they're absolutely necessary, and from what you've just told me you have easy access to moving the trap.
And that is what I would do. Is there any reason that you can't? Cheers, Tom