We have a Cub Cadet 24" Snowblower complete with an Electric Start which has never been used, Unit would always Start on the 1st or 2nd Pull.. If misery loves company, was out cleaning up around the mailbox clearing 2ft down a slight incline Blower Stalls with 1/2 Tank of Gas in it.. Level Ground set throttle Pull Cord it Fread & Snapped about 6 / 8" from the handle, Beauty.. Drag Blower back to the Shed plug in the Electric Starter , primed & set the choke.. Rolls over as it should , doesn't seem to be getting any gas nor do I smell any.. Thoughts & Ideas Appreciated, Cheers Thanks

A quick blast of starting fluid will tell if you have spark, and if fuel is the problem.
Good Luck