wat
Apr 15, 2007, 04:17 AM
Hi I have a shower faucet that continues to flow water when the knobs are completely shutoff.
It only happens with the Hot water, The cold shuts off fine. There are NO LEAKS whatsoever... other than the problem I'm trying to address, I have taken apart both knobs and all seems fine, no leaks, no damages, shower head works fine and that doesn't leak either.
Can anyone tell me what could possibly be the problem? It seems to me as if suddenly the hot water valve doesn't completely "close" when made to do so, I noticed that I have needed to turn the knob tighter and tighter over these past few months in order to completely shutoff the running water but now I don't know what to do.Im a DIY guy. No prof. plumbing experience at all so forgive me if this assumption is incorrect.
Thank you for your time and help. =)
p.s it seems to me like the problem is behind the drywall where I have no access.. no leaks visible still, but from what I saw when taking apart the hot/cold/ knobs
it doesn't seem like the problem can be fixed on the outside, I believe I have tried all I could to investigate this issue and found nothing wrong. Which is why I have stated my assumption.
It only happens with the Hot water, The cold shuts off fine. There are NO LEAKS whatsoever... other than the problem I'm trying to address, I have taken apart both knobs and all seems fine, no leaks, no damages, shower head works fine and that doesn't leak either.
Can anyone tell me what could possibly be the problem? It seems to me as if suddenly the hot water valve doesn't completely "close" when made to do so, I noticed that I have needed to turn the knob tighter and tighter over these past few months in order to completely shutoff the running water but now I don't know what to do.Im a DIY guy. No prof. plumbing experience at all so forgive me if this assumption is incorrect.
Thank you for your time and help. =)
p.s it seems to me like the problem is behind the drywall where I have no access.. no leaks visible still, but from what I saw when taking apart the hot/cold/ knobs
it doesn't seem like the problem can be fixed on the outside, I believe I have tried all I could to investigate this issue and found nothing wrong. Which is why I have stated my assumption.