PDA

View Full Version : Predator engine troubles


7up
Feb 28, 2016, 12:44 PM
I have a predator 212cc engine from harbor fright.the problem happens sometimes but not all the times.when I try to pull start the engine it does not pull, instead it pulls the cord back in. what would be the cause of this?

talaniman
Feb 28, 2016, 06:09 PM
Won't start? When was the last tune up? Got a manual?

crigby
Mar 3, 2016, 07:27 AM
Hi,
An out-of-time engine will cause it to pull back on the rope. Check the flywheel key. If it is fine, then you probably have misbehaving ignition module that not resetting. It could take hours, days, months or years to fully fail; so I would not replace it until it worse or failed.
Peace,
Clarke

7up
Mar 7, 2016, 02:40 PM
Hi,
An out-of-time engine will cause it to pull back on the rope. Check the flywheel key. If it is fine, then you probably have misbehaving ignition module that not resetting. It could take hours, days, months or years to fully fail; so I would not replace it until it worse or failed.
Peace,
Clarke
The engine is on a minibike,so the sooner I fix the problem the sooner I can ride it.