PDA

View Full Version : LT133 Belt Routing


griff56
Aug 13, 2015, 09:31 AM
I have a JD lt133 mower on which I had to replace the right outside deck pulley. I pulled the deck from under the tractor to do this repair. I did not remove the belt from anywhere except the drive pulley on the motor and the outside pulley. When I tried to re-install it was as if the belt had grown longer. Not sure where the problem is. Help.

crigby
Aug 15, 2015, 11:17 AM
Hi,
A common question I have answered numerous times. Try this page on one of my sites:
John Deere decks by crigby (http://opebycrigby.freeiz.com/decks/jddeck.html)
47725