Catsnake
Jul 24, 2015, 08:02 AM
I'm replacing the fan motor on my older Miller outside condenser.
The original motor was no longer available so I purchased a Fasco
Motor with the same specs. The original motor had 3 wires - 2 that went
To the F (black) & C (orange) lugs on the capacitor and one (blue) to
The T2 connection.
With the new motor I'm confronted with 4 wires, 2 with spade
Connectors (brown & brown/white) which are obviously meant to go
To the capacitor (but which wire goes to which lug?) - AND a
Black (hi) & white (com) wires which are just stripped ends.
I only know enough to get myself into trouble, but can you shed
Any light on this?
The original motor was no longer available so I purchased a Fasco
Motor with the same specs. The original motor had 3 wires - 2 that went
To the F (black) & C (orange) lugs on the capacitor and one (blue) to
The T2 connection.
With the new motor I'm confronted with 4 wires, 2 with spade
Connectors (brown & brown/white) which are obviously meant to go
To the capacitor (but which wire goes to which lug?) - AND a
Black (hi) & white (com) wires which are just stripped ends.
I only know enough to get myself into trouble, but can you shed
Any light on this?