PDA

View Full Version : Craftsman troubleshooting


DENNIS52
Jun 28, 2015, 01:42 PM
I have a craftsman riding mower and when I release the clutch pedal or engage the mower drive the engine stalls.

DENNIS52
Jun 28, 2015, 01:45 PM
My mower is 15.5hp ohv 42 inch when I release the clutch pedal or engage the mower my engine stalls. Where do I start?

Thanks

catonsville
Jun 28, 2015, 10:19 PM
My mower is 15.5hp ohv 42 inch when I release the clutch pedal or engage the mower my engine stalls. Where do I start?

Thanks

First I would check to see if something is stopping the blades from turning by checking the underside. Blades need to turn freely. More info would help like
Was the machine running OK up until this problem, check if the belt or belts are
Turning. Did you make any changes to the machine before this problem?

catonsville
Jun 28, 2015, 10:25 PM
My mower is 15.5hp ohv 42 inch when I release the clutch pedal or engage the mower my engine stalls. Where do I start?

Thanks

First I would check to see if something is stopping the blades from turning by checking the underside. Blades should turn freely. More info would help like, Was the machine running OK up until this problem, check if a belt is broken.
Did you make any changes to the machine before this problem?

I have a mower, that I need to make sure the engine RPM's are high enough to make the clutch engagement not stall
the engine.