I have a Maytag Neptune stacker unit (5 years old) which has begun to "puddle" underneath the unit during the wash cycle. It's not a flood, but a slowly spreading puddle that reaches one to two inches around the front left side to left side (facing the unit) of the machine. Otherwise, it works okay. There's a faint musty smell, too. The door gasket is fine (the focus of the recall). It seems like the water isn't draining properly. Also, there seems to be A LOT of water sloshing around behind the tub that should have drained. Any ideas/fixes? Thanks!

I had the same problem...

You need to replace a large flexible rubber boot.

Under my AHS contract, it was replaced.

Ok. I'll check into it immediately. Thanks much!