I found a picture of the bolts I need on the internet, but cannot find where to get them or the name.


Anyone know what they are called and where I could get some ?

It looks to be a concrete screw/anchor. If you print the picture and take it to your local supply house they should be able to tell you what it is and who makes it (brand).

Thanks for the reply... but I've looked local and cannot find, that's why I'm searching internet.

In my area... True Value Hardware has everything I normally need, they do not have it.

Looks like a commercial hanger bolt. Is this for concrete?

No, it would not be used for concrete, I would use in wood.

Need a lag screw on one end and bolt thread on the other, but I need that hex section on end to screw it all the way down to the bolt thread section.

Thanks

Looks like hanger bolts it is.

https://www.boltdepot.com/Catalog.aspx?wt.srch=1&wt.mc_id=msnboltsmain&utm_source=bing&utm_medium=cpc&utm_campaign=WSOA%20*%20Main%20Bolts&utm_term=nut%20and%20bolt%20suppliers


https://www.boltdepot.com/Hanger_bolts.aspx

@cdad... that's close.

Those would not allow me to embed pass that middle transition section.

The bolts in the picture have a head on end of bolt section that you can tighten from.

Thanks for your efforts.

Use the one cdad suggested and buy a couple of nuts and use as a jam to screw to the depth you need.

Panelmate anchors, here is a link


PanelMate Pro® Anchors- Simple and Affordable Hurricane Protection (http://www.windstormproducts.com/panelmate-pro-anchors/)

Thanks parttime... I may have to try your suggestion.


aha .... thanks for the link, that's what I was searching for.

Your welcome, the first suggestion you can buy about any hardware store, the other you have to wait on an order. Good luck

Partime-good find, never heard of them before!