What is the sequence to reset kenmore dishwasher 665.16819992? The buttons from left to right are pots/pans, normal wash, water miser, china gentle, quick rinse, water Heat, no Heat dry, delay Hours, start, cancel/drain. I don't have Any buttons air dry or hi temp. I have read all the comments on all website and it didn't fix my problem.. Please help!

Flip the breaker off that controls the DW. Wait a couple of minutes and flip the breaker back on. Anything?

I tried it a couple of Time and it doesn't work...

See if this helps: https://dl.dropboxusercontent.com/u/8010163/Kenmore_Resetting%20fault%20codes.docx (from posts on this site)

It doesn't works too because I don't have the heated dry button.

Here are some manuals for Whirlpool and Kenmore dishwashers: https://dl.dropboxusercontent.com/u/8010163/Whirlpool_Kenmore%20Dishwashers.zip
https://dl.dropboxusercontent.com/u/8010163/whirlpool_dishwasher.pdf
https://dl.dropboxusercontent.com/u/8010163/Whirlpool_Dishwasher_Service_manual.pdf
https://dl.dropboxusercontent.com/u/8010163/Kenmore_Ultrawash_Dishwasher.pdf
You did not give the name of the dishwasher to help narrow down a search, so all I can do is give you these manuals. You may have a problem with a safety tripped. You need to check it out with a meter if you cannot reset it. Here is a good manual: https://dl.dropboxusercontent.com/u/8010163/Electrical%20Theory%20and%20Diagnosis%20of%20Major %20Appliances%20Service%20Manual.pdf