View Full Version : Question on how to plumb a Utility Tub and Washing Machine into Waste Drain Line.
harv_85
Feb 27, 2015, 03:27 AM
I am looking for advise on how to properly connect a Utility Tub and Washing Machine into my sewer/waste drain line. Any help is appreciated. I have attached a picture of my idea/possible layout of the plumbing.
massplumber2008
Feb 27, 2015, 10:24 AM
Hi Harv
What is draining into the main stack from above? If there are any fixtures at all (and I suspect it is at least one or two full bathrooms) that drain into this vertical drain pipe then you MUST add a vent for the sink AND a vent for the washing machine... these vents can connect together and must then connect into a vent somewhere in the house or run up and through the roof by itself.
If mechanical vents are allowed in your area (see AAV) this will be easier than running a dedicated venting battery to another vent in the house (or out the roof).
This work usually requires a plumbing permit and an inspection of the work by a local plumbing inspector... just an FYI!
Back to you...
Mark