I moved the furnace 10 feet to a new location. I fired it up and it works great! But, it will not shut off. This is a heat only system and it was installed in 2008.
Things I have done. I ran a new thermostat wire (red and white). I put on a new thermostat.
Before I could stop my helper, he had disconnected a few of the wires that have push on fittings on them. I have a before and after picture of the furnace wiring so I think everything is where it should be but something isn't right!
The thermostat wire is hooked to the red and white connections on the 5 connection "bridge" and I don't think they were removed.
I have a wiring diagram but I'm not skilled enough to read it. (Also available on line)

What do I do?

CountryG, welcome to the forum. If you can provide a link to the wiring diagram, I can probably help you. I did an online search & could find nothing.