Happy Easter!

I'm using a Hunter Breeze Remote and its associated control module to control the fan motor in my Propane Gas Fireplace. This works quite well... no problem.

I would like to use the light portion of the control module to energize a relay to turn the fireplace on and off.

I have two questions:

1. Where can I buy a light module?

2. Does any one know what voltage signal is sent to the light module from the control module?

Ok, the electronics to control the light should be in the remote receiver along with the electronics to control the fan. How many wires does it have, and what colors?

Let me repeat... This is not ceiling fan... it's an axial fan in my gas fireplace.

I have a Harbor Breeze control module and its associated remote...

I now use the remote to turn the fan on and off... no problem.

The control module has a blue lead that normally would connect to the

Light module for a ceiling fan.

I have a 120 VAC relay which I want to energize to remotely turn the fireplace

On/off.

I'm looking for the light control module that the blue lead would connect to.

The blue lead wouldn't connect to a light module. It would connect to your light. That blue lead connects to one terminal of the 120v coil in your relay. You connect the other end of the coil to the white (neutral) lead also connected to your motor.