PDA

View Full Version : Pentair Honeywell Gas Valve


qapd
Jul 30, 2014, 01:09 PM
My Pentair pool heater uses a Honeywell 073998 gas valve. The plastic connection on the side where the PV Blue, MV/PV, and MV Red plug in is lose. Can you replace just the plug in module? If so where can you by just the plug in module? I can get the heater to fire off if I constantly hold the module in the correct position. I found a module repair video on YouTube where a guy removes the module and solders small wires onto the control module and onto the coils to bypass the contacts. I would rather replace the valve before I solder wires on the module.