PDA

View Full Version : Waching machine not getting water


DIY naive
Jun 4, 2014, 12:15 PM
I have recently moved to my flat and got a new Bosch washing machine which was working great. Today I was checking the flat's stopcock and just closed it and opened it to make sure it is working. Then I wanted to use my washing machine and gives error E29 which in the manual says" clean the filter or water pressure too low". As this happened right after me closing and opening the stopcock, it has got to be relevant? The sink tap working fine and water pressure is fine. What should I do?

ma0641
Jun 4, 2014, 02:13 PM
Turn off the water, remove the hoses and make sure the screens are clean. By opening the cock, you may have disturbed sediment that then clogged the screen.

DIY naive
Jun 5, 2014, 12:02 AM
Hi and thanks for reply. At the back of my washing machine there are two hoses. One can be taken off easily and there is a surface with micro size holes on the washing machine when I opened it that was clear. The othe hose is coming from inside the machine an doesn't seem to be easily seperable though is double the size of the first hose. What do you think?