Ice maker inlet valve tubing is missing a part
I think it needs a ferrule that goes on
The tubing first before it screws in the fitting. See picture.

Compression ferrule. HD carries them.

Compression ferrule. HD carries them.
Thank you so much

Actually, you want a PLASTIC ferrule and metal INSERT sleeve for a plastic tube (see image below). Without the insert, the tube can pull out through the compression ferrule...;) The insert sleeve is not required with copper tubing.

Of course, you want 1/4" compression, not 3/8" as in the pictures.

Mark

Actually, you want a PLASTIC ferrule and metal INSERT sleeve for a plastic tube (see image below). Without the insert, the tube can pull out through the compression ferrule...;) The insert sleeve is not required with copper tubing.

Of course, you want 1/4" compression, not 3/8" as in the pictures.

Mark

Thank you I did get compression sleeve with brass insert