My faucet came with spray hose already connected, and I need to remove it to get the mounting nut past the water feed connections. Kitchen faucet model # 441420005.

There should be a threaded brass connection where the hose connects to the faucet. Unscrew it and use Teflon Tape when you replace it. Good luck, Tom

No longer threaded connections at the spray Tom...UGH! I'm sure it is some special clip or spring loaded connector nowadays! Jim, we need to know the manufacturer and that model number you gave shows up as nothing. Check your model number again (not the SKU #) and provide the manufacturer and we can probably help!

Mark

Thanks Mark,
That's what happens when you've been retired and off the service truck for 25 years. Not only life, but al;so products pass you by. Thanks foe the correction. Tom