View Full Version : Slipping Hand Held Shower
les1961
Mar 18, 2014, 12:02 AM
We have a hand held shower which slots into a circular holder that is attached to a pole that is attached the shower wall. The shower head slots into the circular piece a bit like a microphone does. The circular piece is screwed into the pole but tit slowly spins around under the weight of the shower head. I have tried to do the screw up tighter but after a day or so it comes loose again. Any suggestions?
dontknownuthin
Mar 18, 2014, 05:46 AM
I would contact the manufacturer. My dad had two defective MOen faucets and the company sent free replacements for both. This sounds like a design flaw. They may have something similar without this issue that you could swap out.
speedball1
Mar 18, 2014, 06:35 AM
They make a thread sealant. Click on Thread Sealants | Buy Rivets | Rivet tools - Rivet Nuts & Other Specialty Fasteners (http://www.rivetsonline.com/thread-sealants.html?sef_rewrite=1) to see. Good luck, Tom