Kenmore Washer 80 series will not fill with water. Inlet valve, timer are good. Model number 11026862503

Disconnect the water line from the fill solenoid, extend the water line to get it into the sink and see what happens when you try the DW. Water? You have a bad solenoid or possibly a stuck water level shutoff.

You also have a water level switch that could be bad. Manuals: https://dl.dropboxusercontent.com/u/8010163/Whirlpool-Kenmore%20washers.zip
https://dl.dropboxusercontent.com/u/8010163/Understanding%20automatic%20washer.pdf
https://dl.dropboxusercontent.com/u/8010163/How%20to%20use%20Test%20Equipment%20Service%20Manu al.pdf
Have you checked the inlet screens, too?

Water level switch is good. No voltage to the inlet valve.

Thank you

Find out where the circuit is being interrupted.