PDA

View Full Version : Stacking washer and dryer


cookingsnow
Feb 4, 2014, 12:56 PM
I am able to replace my Kenmore washer, however Kenmore does not make a model that will stack with my dryer. Is there another model/brand washer that will work with my Kenmore washer? The model #11047571600. I really don't want to have to nor can I afford to purchase a new dryer.

Appliance centres are really helpful when you start shopping ! I have LG front loading stackables, computerized, low water usage, gas dryer for efficiency. Were not expensive here in Ontario, I think about 1200 for the pair.

The temps have been very cold. There was water two days ago and at the coldest days with windchill of -55F. So it is now at -21F in Iowa. The heat lamp is secure and the temp in the pit for the pressure tank is at 40F. The pressure switch has been changed, but shuts itself off. There is no water in the pressure tank. This leaves us wondering if there is any water in the well due to ground water possibly being frozen. The well's depth is 65F. The well pump is only a few months old as is the pressure tank and the pressure switch was the same age as the rest. The pressure tank is completely empty. Could it be that we simply have to wait for it to thaw?

Also would like to add that there is pressure of 40 pounds in the pressure tank