PDA

View Full Version : Popup stopper


WebsterJDuck
Dec 27, 2013, 02:59 PM
Does anyone know where to find a pop-up stopper like this. I have about 10 of these (bronze and chrome) in my house. Inner most seal is about 1-1/4" in dia and the top most piece in 2-1/4" in dia.

Apologies for the gross picture. To make up for it I put it on a pretty card.

imgur: the simple image sharer (http://imgur.com/CAIUuXs)

imgur: the simple image sharer (http://imgur.com/LWd3eZk)

speedball1
Dec 27, 2013, 03:23 PM
Why not simply replace the old one? I just came from eBay where they have lots of bronze lavatories, pop ups. Just ask. Good luck, Tom

WebsterJDuck
Dec 27, 2013, 05:48 PM
Thanks. Because the fit is odd, I'd have to change the flange and pop-up. This is a poor design and leaves the underlying flange in bad shape. I'm hoping to postpone this until I have more time. Any pop-up dimensions I can find would leave the marred up flange exposed. I may have to bite the bullet and change it to something standard

Milo Dolezal
Dec 28, 2013, 12:51 AM
Usually, the stopper is part of the drain assembly and requires a stopper made by the same manufacturer to fit the drain... Sometimes you can use generic replacement stopper from Box Store and it may work OK. Don't be surprised if you will have to replace the entire drain assembly. Every new drain assembly comes with its own stopper. Back to you. Milo