I posted a question regarding this problem a week ago. I've only had this new dryer for a week and have already had two service visits on this problem. It was checked to make sure it was level and the vent was cleaned and made slightly larger. The first service man thought that was the problem, but there was no change. I have a third service call scheduled with an authorized Whirlpool service. I believe this is a bad unit and should be replaced. The dealer says I have to have 3 repair visits before they can request a replacement from Whirlpool. Has anyone had this problem with a Cabrio dryer?

If you had two service calls and are not satisfied just call a third time. They will either fix it or replace it just keep calling.

I've seen in the past in most cases involving high noise levels on new Dryers, where the motor itself was actually bad. Being new, It's one of the first obvious things I look for. Bet that's the problem. Also, The blower wheel was bad on one unit I serviced. Check that motor..