PDA

View Full Version : Kerosene Heaters and wicks


darleneW
Dec 2, 2013, 01:01 PM
I have two Kerosene heaters and they both say they take the same wick. RMC 95-C2. We have replaced them after purchasing them new and the original wick lasted for a long time, but we only get a few hours of burn time out of the replacement wick. We have had them professionally installed and have done them ourselves with the same results. When I called the number on the one heater they told me we are using the wrong wick. We are to use Kero-world #32225, Dura Heat DH-145, glowick 3056.They are www.ghpgroupinc. So I have one ordered and coming and hope for the proper results. Then I called the other number on the other heater and it referred me to www.csvanity.com, so the number no longer is available. If we were using the wrong wick, even though it said RMC-95-C2, then who says that is the right wick for this other one. Here is the information off the heater. Dyna-Glow, CFM-RMC International, model RMC-95-C2, serial number V030915350. If anyone can help me, I would greatly appreciate it.
Thanks, D. Wallace