hnb1327
Nov 19, 2013, 03:38 PM
The stopper in our tub is a lift-and-turn type of stopper. Due to using improper cleaning supplies, the knob that you use to lift and turn the stopper became eroded and broke off leaving the brass insert exposed.
We thought this would be easy, by just having to use a flat-head screwdriver to remove the brass insert, but no matter which way we turn to unscrew the insert it never becomes loose enough to be pulled out.
Any thoughts or suggestions on what should be done?
Thank you.
We thought this would be easy, by just having to use a flat-head screwdriver to remove the brass insert, but no matter which way we turn to unscrew the insert it never becomes loose enough to be pulled out.
Any thoughts or suggestions on what should be done?
Thank you.