PDA

View Full Version : Seems like no power to my washer


laundrylady
Mar 29, 2007, 12:17 PM
I have a Kenmore Elite Catalyst washer (model # 11022052100) that was working fine, then the next time I went to use it I pushed the buttons to begin washing - the lights lit up - the water flowed through the detergent cup for a few seconds - then everything turned off. I again pushed the buttons to start the machine - the lights flickered on for a second then nothing. Now it's as if there is no power to the machine ( I did check the plug- it is plugged in and the plug works). I tried opening the lid and then pushing stop/cancel 2 times to reset but that does not help. Could it be a fuse? Please advise as to what I can do. Thanks a lot.

tickle
Mar 29, 2007, 01:29 PM
Did you actually check the fuse box in your house ?

laundrylady
Mar 29, 2007, 04:05 PM
Thanks for your response. Yes I did check the circuit breaker and all is OK. The plug is working for the dryer so I know it's not the juice to the plug.