View Full Version : Pilot Light Will Not Stay Lite on my natural gas furance after I installed a new pilo
mike918
Oct 8, 2013, 11:34 AM
My pilot lite will not stay lite after I replaced the pilot/thermocoupler with a new one because the old one did the same thing
Grady White
Oct 8, 2013, 07:46 PM
You need to confirm you are getting the correct voltage from the thermocouple. That voltage is most commonly around 30 millivolts DC. If you are getting the correct voltage & the thermocouple was snugly installed into the gas valve, you probably have a bad gas valve.
mike918
Oct 9, 2013, 03:20 PM
You need to confirm you are getting the correct voltage from the thermocouple. That voltage is most commonly around 30 millivolts DC. If you are getting the correct voltage & the thermocouple was snugly installed into the gas valve, you probably have a bad gas valve.
Thank you I will check and let you know what happens