If I hold the key in the on(crank) position the car stay on and allows me to rev, but as soon as I let go the car dies out. I checked all fuses and they are all good. My alternater is also brand new. Any ideas what it can be?

You need to replace the ignition switch. Be sure to disconnect the negative battery cable first.

You need to replace the ignition switch. Be sure to disconnect the negative battery cable first.

You wouldn't happen to know what tools I'm going to need to remove it?

Ignition Switch Replacement

1. Disconnect negative battery cable (10mm ratchet).

2. Remove dashboard lower cover and knee bolster (#2 Phillips head screwdriver).

3. Disconnect 5-P connector from under dash fuse box and 7-P connector from main wiring harness.

4. Remove steering column covers (#2 Phillips head screwdriver).

5. Insert key and turn it to "0".

6. Remove two screws (#2 Phillips head screwdriver) from switch and replace.