jack of many
Aug 20, 2013, 08:50 AM
I am replacing a Seco 24 VAC TA2000 with a Honeywell CT3611thermostat. On the SECO, Black wire is currently connected to E and blue is connected to X .
From the Honeywell's previous wiring connection to a similar system, the blue wire was connected to Honeywell's C. All other wires are connected to the corresponding color's letter - although white is connected to Honeywell's W2. There is a jumper from Honeywell Y to W1.
There is a Black wire on the Seco stat connected to it's E terminal on the far right.
Where does this black belong on the Honeywell?
From the Honeywell's previous wiring connection to a similar system, the blue wire was connected to Honeywell's C. All other wires are connected to the corresponding color's letter - although white is connected to Honeywell's W2. There is a jumper from Honeywell Y to W1.
There is a Black wire on the Seco stat connected to it's E terminal on the far right.
Where does this black belong on the Honeywell?