I replaced an Intertherm analog thermostat with a Hunter Fan digital and the
Wire tags used to identify the placement fell off. It is a five wire system and not a heat pump
I went by colors and the unit worked all day, I was just running the cooling side.. During the night the outside air conditioner compressor continued to
Run. The fan did not come on but the compressor ran for over an hour.
I may have a wire wrong. Any ideas. Hunter Fan support was no help.
I can't locate a wire diagram that gives color identity. Help

Red to rh jumped to rc
Blue to c
Green to g
White to w
Yellow to y

Does this t-stat have a installer setup??
On a side note never buy hunter t-stats!!

Thanks. I got the old Intertherm back in place and it works. I will take the heads up on
The unit. I got what I paid for and will change to a better unit.
Thanks again.

Consider a honeywell stat. Hard to go wrong with a honeywell.