don_schneider
Jul 18, 2013, 08:54 AM
I need to replace the ignition switch but I can't get the bottom half of the shroud on the column off
TxGreaseMonkey
Jul 18, 2013, 12:49 PM
See if this helps:
Ignition Switch Replacement
1. Disconnect negative battery cable.
2. Remove dashboard lower cover and knee bolster.
3. Disconnect 5-P connector from under dash fuse box and 7-P connector from main wiring harness.
4. Remove steering column covers.
5. Insert key and turn it to "0".
6. Remove two screws from switch and replace.