lmaypub
Jul 5, 2013, 11:58 AM
Hi,
Just installed a new Liberty 41A ejector pump replacing old one that died. Before sealing the pit I hooked it up; it discharges fine, but then won't shut off after water in pit gets down to 6 inches. Plenty of room for float switch. The pump keeps spewing from air bleed hole, but manual says this is normal. None of the trouble shooting tips worked.
Any ideas? What have I done wrong?
Thanks
Just installed a new Liberty 41A ejector pump replacing old one that died. Before sealing the pit I hooked it up; it discharges fine, but then won't shut off after water in pit gets down to 6 inches. Plenty of room for float switch. The pump keeps spewing from air bleed hole, but manual says this is normal. None of the trouble shooting tips worked.
Any ideas? What have I done wrong?
Thanks