Auburnskydive
May 31, 2013, 07:57 AM
I went through the troubleshooting charts in the 'Installation Instructions'.
The FAN CHECK ONLY flow chart indicated the thermostat was bad. Replaced thermostat. A/C compressor comes on-no blower. Heater lights fine & finally shuts down-no blower.
COOLING CYCLE CHECK and MAIN BURNER troubleshootin flowcharts indicate bad module even though the FAN ONLY CHECK still shows a bad thermostat.
ARRGGG! '
The FAN CHECK ONLY flow chart indicated the thermostat was bad. Replaced thermostat. A/C compressor comes on-no blower. Heater lights fine & finally shuts down-no blower.
COOLING CYCLE CHECK and MAIN BURNER troubleshootin flowcharts indicate bad module even though the FAN ONLY CHECK still shows a bad thermostat.
ARRGGG! '