PDA

View Full Version : Suitable wire


soheila
May 20, 2013, 09:57 PM
Hi. I'm designing a fractional N-PLL which operates in one to two gigahertz. I don't know which kind of wire is suitable in those frequencies. Is there anyone who can help me?

hfcarson
May 21, 2013, 04:00 AM
Sounds easy...
First, what is a N-PLL? What is the power requirement for this N-PLL?

soheila
May 21, 2013, 05:45 AM
Dear hfcarson
Fractional N-PLL is kind of PLL(phased locked loop). It produces a range of frequency solely with a local frequency. It components include a divider, mixer, filter and a VCO.by the way It's my final BS project :D

Stratmando
May 21, 2013, 06:41 AM
I recognized the Phased Locked Loop, what is the N? May need some shielding depending on the use?

soheila
May 21, 2013, 07:09 AM
N is the number which local frequency is divided into :)

hfcarson
May 21, 2013, 09:12 AM
How tight and critical are signals you are generating or controlling?
If I recall, the higher frequencies generate a parasitic capacitance that may be problematic if you're working with register data...
If you have problems during testing with common single conductor unshielded wire, you can try a Belden twisted shielded pair..

hfcarson
May 21, 2013, 09:14 AM
Good lord! It's May already and you're not done your Senior Design??
I feel your pain! And this I remember well...

soheila
May 21, 2013, 11:58 AM
Thanks for sympathising with me :) I haven't chosen the suitable IC for VCO & filter & other components yet! I want to buy them in no time & I didn't know anything about the wire :p by the way can I have your email?
my adviser told me to design an integer pll first because it's easier then I want to improve it. As my memory works, the difference between frequencies is one megahertz. And yes I have kind of register in the IC of the divider.