crokante
Apr 20, 2013, 02:19 PM
I'm having this problem:
The furnace (HEIL 5000) start fine but not the fan. After 3 minutes heating the unit turn off itself and the fan start working for 30 second and the goes off. Then repeats the cycle.
A workaround (mikey mouse) I found is doing a bridge between the 1st contact and the 5th one (starting from the right) -see pic:
https://www.dropbox.com/s/8q3wss0l5uvjls8/Fan%20Module-3.JPG?n=10386083
This way the unit works fine the whole day.
But... if I want to use in the Air Conditioner cooler mode, I need to restore the connection to its original configuration.
Any recommendation about replacing the fan module HeatCraft model FTC5-EHO1 or/and the capacitor (see pic: https://www.dropbox.com/s/ocr5ondkigq4yap/Capacitor-1.JPG?m )
Also, I can find any place to buy those replacement parts (ebay, Google, etc.)
Thanks so much for any advice!
The furnace (HEIL 5000) start fine but not the fan. After 3 minutes heating the unit turn off itself and the fan start working for 30 second and the goes off. Then repeats the cycle.
A workaround (mikey mouse) I found is doing a bridge between the 1st contact and the 5th one (starting from the right) -see pic:
https://www.dropbox.com/s/8q3wss0l5uvjls8/Fan%20Module-3.JPG?n=10386083
This way the unit works fine the whole day.
But... if I want to use in the Air Conditioner cooler mode, I need to restore the connection to its original configuration.
Any recommendation about replacing the fan module HeatCraft model FTC5-EHO1 or/and the capacitor (see pic: https://www.dropbox.com/s/ocr5ondkigq4yap/Capacitor-1.JPG?m )
Also, I can find any place to buy those replacement parts (ebay, Google, etc.)
Thanks so much for any advice!