I have a Troy-Built Bronco Riding Lawn Mower, Model # 13AV60KG011, SR.# IE308H20019. I can not get it to start, even make a noise 99 % of the time, it will try to start ever now and then. I check and see that there is no voltage to the started switch, don't know how the current is distributed to the solenoid or the safety switches. Does someone have a wiring diagram for the mower or where can I get one ? Thanks

Hi,
The battery voltage will generally take on of two paths. It will go directly to the key switch and leave it on the start trigger circuit going through the brake and PTO(deck) switches to reach the solenoid. The other choice is to have it go through those two switches to reach the key switch, rare though it may be. Some systems even involve the ground, though that should not be yours. Do not forget that there is a fuse in there.
To get your parts breakdown, follow this link and click on the I Accept button for a download:
http://www.troybilt.com/webapp/wcs/stores/servlet/OperatorManualDisclaimerView?storeId=10001&catalogId=14102&langId=-1&pdfLink=http%3a%2f%2fmanuals.mtdproducts.com%2fmtd %2fGetFile.do%3ffilename%3d769-04339.pdf&htmlLink=
Peace,
Clarke