PDA

View Full Version : Problem with glacier bay kitchen sink faucet


joey246
Feb 23, 2013, 11:25 PM
Glacier Bay model 166113L

I have a single handle kitchen faucet. The base has ceased up and I can no longer

Move the tap from either side of a double sink. I cannot separate the part that is

Closest to the base and under the spout section which is where the problem seems

To be I believe that replacing the O rings will solve the problem but I cannot get

At them. Any help would be appreciated.

massplumber2008
Feb 24, 2013, 08:08 AM
Hi Joey

Replacing the Orings AND using some silicone grease on them will give you the best result.

I couldn't pull up your specific faucet so can only advise you to get the spout itself up and off the valve... that will expose the Orings.

If you can post a picture I could probably tell you more.

Good luck!

Mark