PDA

View Full Version : Delta 1400 bath faucet


Jbolin1712
Feb 13, 2013, 12:49 PM
I replaced cartridge and cleaned what calcium deposits I could. Still have half the pressure I should have

scott53715
Feb 14, 2013, 10:24 PM
When you turned the water back on, some debris in your supply pipes could have made its way to the back of your cartridge reducing your pressure. Or, your shut-off valves are not fully open. You can try to flush out the valve by opening up the shut-off valves a little and allow water to flow, and then try rinsing out the cartridge and reassemble. Hope this helps.

massplumber2008
Feb 15, 2013, 06:51 AM
If the pressure is OK at the tub spout then you may simply have a clogged shower head. In this case, remove the shower head and run the water without the head in place. Clear the shower head of any sediment/gunk and replace.

If that fails to work, then follow Scott's advice above... ;)

Mark