I'm looking for a web site that sales replasement parts for a (ATLAS 1040 DRILL PRESS) if anybody can help please do.

THANKS 2 ALL WHO REPLY

Hi,
Tha drill press dates back to 1957, I believe. They were made in the 1940s and 1950s, and maybe into the 60s. No supply of parts is known. I did find the 4 page manual, which is kind of neat. Dome simpler things might be found at a well stocked hardware store. Others might be found, with some effort, at an industrial supply place like Graingers.
Peace,
Clarke
PS Manual attached!

Hi,
Tha drill press dates back to 1957, I believe. They were made in the 1940s and 1950s, and maybe into the 60s. No supply of parts is known. I did find the 4 page manual, which is kinda neat. Dome simpler things might be found at a well stocked hardware store. Others might be found, with some effort, at an industrial supply place like Graingers.
Peace,
Clarke
PS Manual attached!

The part I am looking 4 is the driver sleeve,would I be able to find that part if I look at other drill press?

Hi,
Perhaps you can get a fellow owner to put calipers or a micrometer on the part and give you the dimensions so you can have one made. I found the manual at:
VintageMachinery.org | Welcome (http://vintagemachinery.org/)
Peace,
Clarke