Approximately 130V between each of the element terminals and ground, replaced element but no heat. Other checks; new high limit t'stat, operating t'stat shows 7 ohms, element shows 10ohms. Can trace voltage all the way to the element and the element is new. Out of ideas, need help.

KENMORE WASHER AND DRYER
Epinions.com - Posts in Sears Kenmore Elite Dryer Won't Run If Start Button Released (http://www.epinions.com/msg/show_~threads/cat_id_~17/id_~2440/forum_id_~409/sec_~forums/pp_~1#posts)