LikesHeat
Jan 23, 2013, 06:51 AM
Hi,
I have a 6KW generator wired to a Reliant Transfer Switch and the furnace is one of the breakers that is powered. Every circuit runs great, computers, TV, and lights, except the furnace. On Generator power, the furnace gets to the point of igniting the burners, then shuts them down.
It keeps repeating that cycle as long as powered. No fault lights come on the main control board. Is this a power "quality" issue? Is this a grounding issue? The transfer switch was installed by a Master Electrician and the HVAC company says the furnace is working fine. I showed the HVAC technician what happened when on generator power, and he said he suspected a grounding issue.
Any help be appreciated!
I have a 6KW generator wired to a Reliant Transfer Switch and the furnace is one of the breakers that is powered. Every circuit runs great, computers, TV, and lights, except the furnace. On Generator power, the furnace gets to the point of igniting the burners, then shuts them down.
It keeps repeating that cycle as long as powered. No fault lights come on the main control board. Is this a power "quality" issue? Is this a grounding issue? The transfer switch was installed by a Master Electrician and the HVAC company says the furnace is working fine. I showed the HVAC technician what happened when on generator power, and he said he suspected a grounding issue.
Any help be appreciated!