I have replace,ed the S86A with the new S8610U . But the ignition module do not work. The old module have 8 wires.. The New module have 7 wires.. 25V 1 & 25V2 &TH-R & TH-W... The Right Side have MV MV/PV &PV Then Ground... Now on the lift side the TH-W is the white wire & the TH-R is the red wire.. the transformer 25V-1 wire is yellow & the 25V wire is blue... &... on the right side the MV wire is white & the MV/PV wire ls black the PV wire is black and the GND burned wire green... Now.. can you help me to hook this up right... my family is freezing and sick thank you so much.