Okay this going to take some time so hang in therefor me please. I just installed a set of 48h andrews cam, feuling 4000 lifters, ez install andrews lifters and a +4 degree andrews timing gear. I took extra care to triple check that all was in time during the re-assembly, all lifter were preloaded to .100 as per feuling spec. Problem is that when I put it in gear and hit the wick it pops and putters. Sounds like a timing issue but thought I would ask for some insight before I start tearing thing apart again.
Thanks,
Mark

Forgot to mention 2008 flstc 96cid, starts and idles great even out of gear if u krank on the throttle its fine.