Dishwasher won't drain after cycle, hoses are not plugged and pump seems to be okay, no error code. Can I reset it?

You have a safety stuck somewhere. Check all of them, like the float in the tub. What do you mean by saying the pump is "okay?" Did you check it with an ohm meter? That's the only way to know. It sounds like you have a loose wire somewhere. Make sure to check the ground wires that screw to the frame of dishwasher and all other connections, even the ones in breaker box. Tighten all of them with a very good screwdriver so that you get all screws on breakers and grounding and neutral bars. This may help: https://dl.dropbox.com/u/8010163/Kenmore_Ultrawash_Dishwasher.pdf