PDA

View Full Version : Maytag fridge freezer interior panel


Valman1
Nov 9, 2012, 07:20 PM
Can anyone please tell me where I can purchase the plastic interior freezer door panel on a Maytag double door fridge freezer. The panel need not be new but must be in good serviceable condition.

Mine hasthe basket fixing holes cracked and now too large to hold the basket (only one broken).

Many thanks everyone!

ma0641
Nov 9, 2012, 09:52 PM
Other then through a parts house, look for used appliance dealers in your area. Nothing is sold through this site.

ma0641
Nov 9, 2012, 10:08 PM
Other then through a parts house, look for used appliance dealers in your area. Nothing is sold through this site.

drtom4444
Nov 10, 2012, 12:17 AM
Why not try to fix it? What is important is to make sure the hole is sealed from air entering. You can take a piece of Plexiglas or even aluminum, drill a hole in each end and glue over present holes. That should work. If you are determined to replace it, make sure to seal all around the edges with GE Silicone to make it totally air tight. GE had a recall on a whole line of refrigerators because the freezer doors were not air tight which caused all kinds of failures.