PDA

View Full Version : Glacier bay toilet parts


Robert Koblinsk
Oct 7, 2012, 01:24 PM
I have a dule flush high effencency glacier bay tolet. I am experancing flow rates that do not allpw the disposel of waist properly. The tank fills to about one inch below the overflow. This fills the tank to between 1/4 to 1/3 . Do you have other lots and overflows that will allow me th raise the water level. Or are fhere after market items that will help

Thank you
Robert Koblinsky

massplumber2008
Oct 7, 2012, 01:34 PM
Hi Robert

Click on this link and go down to troubleshooting... sounds like you have an issue with the "push rods" to me... ;)

http://www.homedepot.com/catalog/pdfImages/43/4343e934-0450-4e71-a1a8-dd9f2d2128d9.pdf?cm_mmc=seo|altruik|100676582

Let me know how you make out, OK?

Mark