I have a 1990 honda accord? I'm pulling the tranny and I can't get it all the way out I have all the bolts out that I can see.it pulls away from the motor for a short second when push away with a breaker bar. Is there any tricks to getting the tranny out of it?

You have posted this question on the wrong Board. I suggest you get a manual and follow the steps carefully

Manual or automatic? Make sure you completely remove the starter motor--the lower bolt can be overlooked and prevent the bellhousing from separating from the engine block. Since it's the starter motor's ground, it goes into the engine block. If you have all of the bolts out, it should separate on its own and pivot away from the alignment dowels.