geraldw
Jul 26, 2012, 01:51 PM
I have a Lennox furnace and AC unit that were installed at the same time 5 years ago.
In the last couple of weeks if the power fails in my area and then comes back on a problem starts.
The condensing unit will start up but the furnace blower will not. This causes the evaporator to freeze up and the compressor to be coated with ice.
If I shut the power off to the furnace and then turn it back on the problem is fixed.
Any ideas??
In the last couple of weeks if the power fails in my area and then comes back on a problem starts.
The condensing unit will start up but the furnace blower will not. This causes the evaporator to freeze up and the compressor to be coated with ice.
If I shut the power off to the furnace and then turn it back on the problem is fixed.
Any ideas??