PDA

View Full Version : Shower drain for raised shower


prostreetwarrior
Mar 4, 2007, 05:56 PM
Hello I am looking for a shower drain that runs ON TOP of my floor in the basement. I have removed the old shower unit to put in a new one. It has a p-trap that is LOW PROFILE. With the limited space I have I need to find a new one like this one. The old one is damaged and was leaking. The part number on the old one is PVC-DWV No. 42.313 does anyone know where to find this item??
Thanks, jay

iamgrowler
Mar 4, 2007, 06:00 PM
Hello I am looking for a shower drain that runs ON TOP of my floor in the basement. I have removed the old shower unit to put in a new one. It has a p-trap that is LOW PROFILE. With the limited space I have I need to find a new one like this one. The old one is damaged and was leaking. The part number on the old one is PVC-DWV No. 42.313 does anyone know where to find this item?????
Thanks, jay
The part number means nothing to me -- Can you upload a picture of it?

prostreetwarrior
Mar 4, 2007, 06:17 PM
Here are a few pics.

stew_1962
Mar 4, 2007, 06:24 PM
P trap? That looks like just the drain assembly to me.

Stew

prostreetwarrior
Mar 4, 2007, 06:25 PM
Ok what ever it is I NEED ONE!

stew_1962
Mar 4, 2007, 06:27 PM
Yeah, I understand you need one - I'm looking to see what I might be able to scare up. Only thing I was saying is that doesn't suffice as a proper P Trap.

Is there a proper trap downstewam of that thing? It won't stop sewer gas from coming up in your shower, otherwise.

Stew

prostreetwarrior
Mar 4, 2007, 06:46 PM
This is the way the old shower was set up. It drains in to a sealed crock with a pump the pumps to the septic. The sam crock that the clothes washer and sink uses.

stew_1962
Mar 4, 2007, 06:56 PM
What's the diameter of that drain? Looks like 1.5" pipe, right?

Looks almost like the drain ell you see under a tub...

Stew

prostreetwarrior
Mar 4, 2007, 06:58 PM
Yes it's 1 1/2 dia. Pipe

stew_1962
Mar 4, 2007, 07:00 PM
What's the diameter of the drain part?

stew_1962
Mar 4, 2007, 07:19 PM
:D

I've got a kit (from Lowe's or home depot) like this, except the tubing is standard 1/5" PVC pipe. I have an OLD HUGE tub 6.5' that I have to custom fit the waste arm, drain, etc to use it. I bought one of these kits to do it with.

I think the drain and ell is close to what you want - I'm not endorsing this as a solution, just helping you find what you're looking for.

I'm supposing the waste tank is well vented... Personally, I'd crack open the floor and put a proper drain and P trap in.

Good luck
Stew

iamgrowler
Mar 4, 2007, 08:59 PM
Yikes!!

Never seen it -- Don't care to see it again.

doug238
Mar 4, 2007, 10:07 PM
It is a typical sized shower drain that drains horizontal rather than vertical and they used a 2" x 1 1/2" bushing to put a 1 1/2" pipe in it.
Look here Kissler & Co., Inc. (http://www.kissler.com/)